Total Ground Control - 25lt Drums

TGC has been developed as a long-term crusting agent and veneer coat for all non-trafficked applications. When mixed and applied correctly it will give long term benefits in dust lift off prevention from wind and water erosion. The product is diluted in water at a rate between 2% - 10% and sprayed directly onto open ground material for long term results. The solution should be sprayed on the treatment zone at a rate of 1 - 2 litres per m2.

TGC is available in a clear format or TGC Plus which has a green dye. Should the dye fade it is no reflection on the performance of the veneer.

TGC becomes fully effective upon drying. Care should be taken when applying to certain settings such as clay and should not be sprayed directly on waterlogged ground or stockpiles.

Product Mixing Guidelines:

• Fill the water tank to within 80% of its capacity.
• Add the required amount of product to the water tank at a pre-determined rate between 2% - 10% (5% or 1:20 with water is a general standard).
• Top the tank up slowly with water avoiding any frothing of the product.
• Always add the TGC to water and not water to the TGC.
• Apply TGC to the intended area at a rate of 1 - 2 litres per m2.

Typical Settings & Uses:

• Soil Binder for Erosion Control
• Broad Acre Dust Suppressant
• Stockpile Binder
• Revegetation Binder
• Hydromulching Binder
• Hydroseeding Binder